Environmental Chambers
Darwin Chambers Company Triple Door Environmental Chamber 66 cu. ft.
The KB084 is a 76.2 cubic feet triple door environmental chamber. Temperature range is 2 to 50 degrees C. Humidity range ambient to 90 percent. This unit comes with 9 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior and stainless steel floor with coved corners. The KB series chambers feature hot gas by-pass technology which controls the temperature of the epoxy coated evaporator for greater uniformity. The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers.
Darwin Chambers Company Triple Door Heat Humidity Chamber 66 cu. ft.
The HH084-SS is a 76.2 cubic ft triple door heated/humidified incubator. Temperature range is 5°C above ambient to 50°C degrees C. RH ambient to 90 percent. This unit comes w/ 9 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Stainless steel interior. Running the models below will save you up to 80% in electricity costs vs. a compressor unit from competitors.
Darwin Chambers Company Single Door Heat Humidity Chamber 21 cu. ft.
The HH030 is a 23.9 cubic ft single door heated/humidified incubator. Temperature range is 5°C above ambient to 50°C degrees C. RH ambient to 90 percent. This unit comes w/ 3 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior & stainless steel floor w/ coved corners. Running the models below will save you up to 80% in electricity costs vs. a compressor unit from competitors.
Darwin Chambers Company Single Door ICH Stability Chamber 21 cu. ft.
The PH030-SS is a 23.9 cubic ft single door stability chamber. These Chambers are designed for performance specifications exceeding FDA & ICH requirements. Temperature range is 18°C to 50°C degrees C. Humidity range ambient to 90 percent. This unit comes w/ three pvc coated shelves. The chamber interior provides stainless steel side walls & back, stainless steel floor & ceiling. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. The 7 year warranty on cooling components & the ability of our chambers to maintain temperature even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control & avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The PH Series chambers utilize less energy than comparable stability chambers.
Darwin Chambers Company Single Door Environmental Chamber 31 cu. ft.
The KB034 is a 32.1 cubic feet extra wide single door environmental chamber. Temperature range is 2 to 50 degrees C. Humidity range ambient to 90 percent. This unit comes with 3 stainless steel shelves. The chamber provides 304 series stainless steel interior and door liner, corrosion-resistant; also a heavy-gauge powder-coated, galvanized steel exterior. The KB series chambers feature hot gas by-pass technology which controls the temperature of the epoxy coated evaporator for greater uniformity. The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers.
Darwin Chambers Company Double Door Heat Humidity Chamber 47 cu. ft.
The HH055-SS is a 50 cubic ft double door heated/humidified incubator. Temperature range is 5°C above ambient to 50°C degrees C. RH ambient to 90 percent. This unit comes w/ 6 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Stainless steel interior. Running the models below will save you up to 80% in electricity costs vs. a compressor unit from competitors.
Darwin Chambers Company Triple Door ICH Stability Chamber 66 cu. ft.
The PH084-SS is a 76.2 cubic ft triple door stability chamber. These Chambers are designed for performance specifications exceeding FDA & ICH requirements. Temperature range is 20°C to 50°C degrees C. Humidity range ambient to 90 percent. This unit comes w/ nine pvc coated shelves. The chamber interior provides stainless steel side walls & back, stainless steel floor & ceiling. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. The 7 year warranty on cooling components & the ability of our chambers to maintain temperature even if the chamber suffers multiple failures is unmatched by any other refrigeration-based chamber. The ultrasonic humidification system provides excellent humidity control & avoids hot spots seen during chamber mapping of steam boiler equipped chambers. The PH Series chambers utilize less energy than comparable stability chambers.
Percival Scientific Plant Tissue Culture Chamber, CU36L4, 29.7 cu. ft., low heat PetriClear LED lighting, condensation reducing airflow, 4 tiers, 10-44° C ±0.5°, IntellusUltra controller
The CU36L4 chamber is optimized for plant tissue culture in plates, dishes or flasks. PetriClear LEDs are dimmable from 10-100% output with up to 170 µmoles/m2/s irradiance @ 6" from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Specially designed airflow insulates shelf level experiments from heat generated by the underlying light fixture. Four tiers of epoxy coated steel wire shelving slide in and out easily on stainless steel rail assemblies. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs compressor life, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. Contact sales@percival-scientific.com for additional options.
Percival Scientific Plant Tissue Culture Chamber, CU41L4, 37.2 cu. ft., low heat PetriClear LED lighting, condensation reducing airflow, 4 tiers, 10-44° C ±0.5°, IntellusUltra controller
The CU41L4 chamber is optimized for plant tissue culture in plates, dishes or flasks. PetriClear LEDs are dimmable from 10-100% output with up to 200 µmoles/m2/s irradiance @ 6" from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Specially designed airflow insulates shelf level experiments from heat generated by the underlying light fixture. Four tiers of epoxy coated steel wire shelving slide in and out easily on stainless steel rail assemblies. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs compressor life, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. Contact sales@percival-scientific.com for additional options.
Percival Scientific Plant Growth Chamber, E36L2H15, 29.7 cu. ft., SciWhite with red LEDs, 2 tiers, 7-44° C ±0.5°, IntellusUltra controller, touchscreen, ultrasonic humidifier and dehumidifier
The E36L2H15 growth chamber is frequently used for rice, cotton or short/medium height plants. SciWhite w/ red LEDs are dimmable from 10-100% output w/ up to 680 µmoles/m2/s irradiance @ 6". IntellusUltra controller, touchscreen, ultrasonic humidifier and dehumidifier. Interior/exterior of smooth white galvanized steel w/ foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Air circulation inside chamber is from a specifically designed adjustable air diffuser. Two epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit w/ hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. Contact sales@percival-scientific.com for more options.
Percival Scientific Plant Growth Chamber, E41L1H11, 37.2 cu. ft., SciWhite with red LEDs, 1 tier, 7-44° C ±0.5°, IntellusUltra controller, touchscreen, advanced additive ultrasonic humidifier
The E41L1H11 growth chamber is frequently used for rice, cotton or short/medium height plants. SciWhite with red LEDs are dimmable from 10-100% output w/ up to 800 µmoles/m2/s irradiance @ 6". IntellusUltra controller, touchscreen, advanced additive ultrasonic humidifier. Interior/exterior of smooth white galvanized steel w/ foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Air circulation inside chamber is from a specifically designed adjustable air diffuser. One epoxy coated steel wire shelf adjustable in ½” increments. Self-contained air-cooled condensing unit w/ hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. Contact sales@percival-scientific.com for more options.
Percival Scientific Plant Growth Chamber, E36VLH11, 29.7 cu. ft., vertical SciWhite with red LEDs, 5 tiers, 7-44° C ±0.5°, IntellusUltra controller, touchscreen, advanced ultrasonic humidifier
The E36VLH11 growth chamber is frequently used for plant production and growing Arabidopsis. Vertical SciWhite with red LEDs are dimmable from 10-100% output with up to 515 µmoles/m2/s irradiance @ 6". IntellusUltra controller, touchscreen, advanced additive ultrasonic humidifier. Interior/exterior of smooth white galvanized steel w/ foamed-in-place non-CFC insulation and stainless-steel floor for corrosion resistance. Air circulation inside chamber is from a specifically designed adjustable air diffuser. Five epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit w/ hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by cycling refrigerant and hot gas to coil; also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. Contact sales@percival-scientific.com for more options.